Designer and manufacturer of innovative systems for the boating industry

Compression sliding roofs

This system is used to power the movement of a sunroof. A compression movement at the end of the closed stroke ensures that it is watertight and airtight.

Features Dimensions Documentation Similar products

Features

  • Speed: The moving roof travels at a speed of approximately 0.1 m/s.
  • Sealing: This mechanism must be fitted in an area of the boat where rebates have been provided to accommodate it. This installation ensures that the boat is watertight and airtight.
  • Drive type: The movable roof is driven by a sealed drive roller and racks.
  • Safety: A buzzer alerts the boat’s occupants that the sunroof is moving (this buzzer can be switched off).
  • Disengagement in the event of an electrical fault: Simply disconnect the motor connector from the control unit to open or close the roof manually. As an option, we can relocate this control by supplying a wiring harness to connect a manual override switch, which can be positioned anywhere on the boat.

Dimensions

  • A: Roof length
  • AMC T1 ROOF: 2,400 mm
  • AMC T2 ROOF: 1,500 mm
  • AMC T3 ROOF: 1,500 mm
  • AMC T4 ROOF: 1,000 mm
  • B: Centre-to-centre distance between rails
  • AMC T1 ROOF: 2,480 mm
  • AMC T2 ROOF: 2,530 mm
  • AMC T3 ROOF: 2,530 mm
  • AMC T4 ROOF: 1,216 mm
  • C: Rail length
  • AMC T1 ROOF: 3,400 mm
  • AMC T2 ROOF: 2,390 mm
  • AMC T3 ROOF: 2,390 mm
  • AMC T4 ROOF: 1,610 mm
  • D: Rail curvature radius
  • AMC T1 ROOF: 9,650 mm or non-curved
  • AMC T2 ROOF: 9,650 mm or non-curved
  • AMC T3 ROOF: 9,620 mm or non-curved
  • AMC T4 ROOF: non-curved
  • E: Roof line
  • AMC T1 ROOF: 1,680 mm
  • AMC T2 ROOF: 1,230 mm
  • AMC T3 ROOF: 1,070 mm
  • AMC T4 ROOF: 665 mm

Information request

Would you like to receive a technical document, product information or study a specific project? Don't hesitate to contact us using the form below or by telephone on +33 5 34 47 00 09.

    Bespoke adaptation

    NOVAL Marine Systems works with its customers to tailor its products to meet the specific requirements of each project.

    Listening and framing your needs

    Custom design and 3D modelling

    Costing, validation and technical documentation

    On-site prototyping, testing and fine-tuning

    Series production and assistance

    Our other products in the range :

    Commitments

    Standard, adaptable or bespoke products

    Validated by standardised technical tests

    Designed and manufactured in France

    Standard products, tried and tested

    © 2026 NOVAL Marine
    Legal information Privacy policy